BL-5311 is made using high-quality PVC film coated with high performance acrylic based pressure sensitive adhesives. It is suitable for continuous use at 125°C with good electrical, flammability and soft property, not influenced by most chemical substances and humidity. It complies with RoHS and REACH requirements.
Black, White, Yellow, Red, Blue, Green
* Other sizes and colors are available on request
Length:18m, 20m, 33m
Width: 19mm, 25mm, 32mm
Core ID: 38mm
Black and other colors available
Highly conformable
Flame resistant
Controlled, even unwind
Meet RoHS & REACH
Use as permanent wrapping on wiring harness agricultural equipment, aircraft, aerospace and electronic assemblies. Preferred when requirements include need for numerous colors plus long term reliability under varying and extreme environmental conditions.
| Item | Typical value | Unit | Testing method |
| Total Thickness | 0.11±0.015 | mm | EN 1942 |
| Temperature Rating | -25~125 | °C | GMW 16740 |
| Break Strength | 16 | N/cm | ISO 29864 |
| Elongation | 200 | % | ISO 29864 |
| Adhesion strength to steel | 1.5 | N/cm | ISO 29862 |
| Adhesion strength to backing | 1.5 | N/cm | ISO 29862 |
| Flammability | B (self-extinguishing) | GMW 16740 | |
| Abrasion Resitance | Class A (≤100) | cycles | ISO 19642-2 |
| Noise Reduction | Class A (0~2) | dB(A) | GMW 16740 |
*Note: data in table represent typical value and are not to be used for specification purposes. The product user should make his/her own tests to determine the products suitability for the intended use.
The shelf life of the product is 24 months when stored at 20-30°C, max 65% relative humidity and out of direct sunlight, in original packaging
BL-51085
BL-51085 is made using high-quality PVC film coated with high performance acrylic based pressure sensitive adhesives. It is suitable for continuous use at 85°C with good electrical, flammability and soft property, not influenced by most chemical substances and humidity. It complies with RoHS and REACH requirements.
BL-5110
BL-5110 is made using high-quality PVC film coated with high performance acrylic based pressure sensitive adhesives. It is suitable for continuous use at 85°C with good electrical, flammability and soft property, not influenced by most chemical substances and humidity. It complies with RoHS and REACH requirements.
BL-5212E
BL-5212E is made using high-quality PVC film coated with strong EB curing hot melt adhesives. It is suitable for continuous use at 105°C with good electrical, flammability and soft property, not influenced by most chemical substances and humidity. It complies with RoHS and REACH requirements.
BL-5210
BL-5210 is made using high-quality PVC film coated with high performance acrylic based pressure sensitive adhesives. It is suitable for continuous use at 105°C with good electrical, flammability and soft property, not influenced by most chemical substances and humidity. It complies with RoHS and REACH requirements.
BL-5211
BL-5211 is made using high-quality PVC film coated with high performance acrylic based pressure sensitive adhesives. It is suitable for continuous use at 105°C with good electrical, flammability and soft property, not influenced by most chemical substances and humidity. It complies with RoHS and REACH requirements.
BL-5212
BL-5212 is made using high-quality PVC film coated with high performance acrylic based pressure sensitive adhesives. It is suitable for continuous use at 105°C with good electrical, flammability and soft property, not influenced by most chemical substances and humidity. It complies with RoHS and REACH requirements.
BL-5219
BL-5219 is made using high-quality PVC film coated with high performance acrylic based pressure sensitive adhesives. It is designed for fast, efficient production taping over solder joints, and is suitable for continuous use at 105°C with good electrical, flammability and soft property, it is not influenced by most chemical substances and humidity. It complies with RoHS and REACH requirements.
BL-5222
BL-5222 is made using high-quality PVC film coated with high performance acrylic based pressure sensitive adhesives. It is designed for fast, efficient production taping over solder joints, and is suitable for continuous use at 105°C with good electrical, flammability and soft property, it is not influenced by most chemical substances and humidity. It complies with RoHS and REACH requirements.
BL-5313
BL-5313 is made using high-quality PVC film coated with high performance acrylic based pressure sensitive adhesives. It is suitable for continuous use at 125°C with good electrical, flammability and soft property, not influenced by most chemical substances and humidity. It complies with RoHS and REACH requirements.
BL-5315
BL-5315 is made using high-quality PVC film coated with high performance acrylic based pressure sensitive adhesives. It is suitable for continuous use at 125°C with good electrical, flammability and soft property, not influenced by most chemical substances and humidity. It complies with RoHS and REACH requirements.
BL-7222
BL-7222 is made using high-quality PET nonwoven coated with strong acrylic based adhesives. It is suitable for continuous use at 105°C.
BL-7228
BL-7228 is made using high-quality PET nonwoven coated with strong acrylic based adhesives. It is suitable for continuous use at 105°C.
BL-6318
BL-6318 is made using high-quality PET cloth coated with strong acrylic based presure sensitive adhesives. It is suitable for continuous use at 125°C.
BL-6425
BL-6425 is made using high-quality PET cloth coated with strong acrylic based presure sensitive adhesives. It is suitable for continuous use at 150°C.
BL-5230P
BL-5230P is high quality soft PVC sheet, with a 15mm acrylic based adhesive strip on one side, hand applicable. It is suitable for continuous use at 105°C.
BL-5240P
BL-5240P is high quality soft PVC sheet, with a 15mm acrylic based adhesive strip on one side, hand applicable. It is suitable for continuous use at 105°C.